Cisco CCNA Syllabus in 5 Days Training Course
A 5 day practical networking course designed to familiarise students with Cisco IOS (version 12). The course details the key commands used to configure and secure Cisco routers and switches, and covers the CCNA syllabus - including wired and wireless LAN access.
Students will inter-connect networks by implementing static routes, distance-vector and link-state based dynamic routing protocols.
The devices will be configured to route traffic across LAN/VLAN//WAN boundaries, by encapsulating datagrams across serial data links using various WAN protocols, such as HDLC, Frame Relay, ISDN and PPP (with CHAP authentication). VLAN encapsulation/tagging will be via IEEE802.1Q/P.
Standard and Extended Access Control Lists will be configured and applied to router interfaces to filter traffic based on IP address and/or traffic type.
Students will configure static and dynamic NAT to route between private and public networks and cover the theory of Virtual Private Networks (VPN's)
Students will copy router configurations and IOS images to/from a TFTP Server. Privileged commands will be used to debug TCP/IP protocols to ensure proper operation of the routers. Students will also perform password recovery operations.
The course is primarily aimed at IP v4 but does give an overview of IP v6 addressing and covers migration from an IP v4 to an IP v6 network. Other protocols and technologies (VPN's / Wireless) may be demonstrated if time permits.
Course can be customised to precise requirements of customer.
This course is suitable for anyone looking for a basic understanding of internetworking with Cisco devices and covers the CCNA syllabus.
Course is approximately 50% practical
At the end of this course the student will be able to configure Cisco routers to:
- Inter-connect networks using static routes
- Inter-connect networks using RIP, OSPF and EIGRP.
- Route between VLAN's.
- Encapsulate datagrams using PPP
- Apply Standard and Extended Access Control Lists
- Encapsulate datagrams using HDLC
- Encapsulate datagrams using Frame Relay
- Configure Frame Relay Switching.
- Support ISDN dial backup.
- Route between public and private networks using NAT.
At the end of this course the student will be able to configure Cisco switches to:
- Run Spanning Tree Protocol.
- Support VLANs.
- Connect switches via VLAN Trunks.
- Lab Exercise 1: Connectivity and Testing
- Lab Exercise 2: Checking ARP Cache
- Lab Exercise 3: Traceroute
- Lab Exercise 4: Telnet into a Router
- Lab Exercise 5: Configuring routers using TFTP
- Lab Exercise 6: Configuration and Connectivity using RIP
- Lab Exercise 7: Network Failure
- Lab Exercise 8: Running other Routing Protocols
- Lab Exercise 9: Spanning Tree Protocol
- Lab Exercise 10: VLAN Exercise
- Lab Exercise 11: Inter-VLAN Routing.
- Lab Exercise 12: Classful & Classless Routing - Subnetting at Byte Boundaries
- Lab Exercise 13: Access Lists
- Lab Exercise 14: PPP Encapsulation
- Lab Exercise 15: Frame Relay Encapsulation and ISDN dial backup.
- Lab Exercise 16: Static and Dynamic NAT Configuration.
Public ClassroomParticipants from multiple organisations. Topics usually cannot be customised
Private ClassroomParticipants are from one organisation only. No external participants are allowed. Usually customised to a specific group, course topics are agreed between the client and the trainer.
Private RemoteThe instructor and the participants are in two different physical locations and communicate via the Internet
The more delegates, the greater the savings per delegate. Table reflects price per delegate and is used for illustration purposes only, actual prices may differ.
|Number of Delegates||Public Classroom||Private Remote|
Where would you like to take it?
When are you looking to take it?
|Location||Date||Course Price [Remote/Classroom]|
Too expensive? Suggest your price