Cisco Security Training Courses

Cisco Security Training

Cisco Security training

Client Testimonials

SIP protocol in VoIP

Handson and setup were nicely done and practical knowledge thoroughly imparted. Trainer was really helpful throughout.

B Kishore - Bharat Electronics Limited (BEL)

Cisco Security Course Outlines

Code Name Duration Overview
wpeapawscw One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server 7 hours This one day workshop covers the configuration and operation of the IEEE802.1x protocol in the authentication and authorisation of a wired Windows 7 supplicant. The authenticator is a Cisco Switch and the server is Windows NPS running on Windows 2008 R2 server, operating as a Certification Authority (CA). The EAP protocol is Protected EAP (PEAP) and a successful request will be allocated a VLAN on the switch via RADIUS attributes received from the server following successful authentication. The procedure for a wired supplicant is almost identical to that of a wireless supplicant. Audience: Suitable for network planners, engineers or anyone interested in operation of PEAP with Cisco IOS Devices and NPS.
wciosd Workshop for Cisco IOS Devices Implementing IPSec using Certificate Authentication via a Windows 2008 R2 CA 7 hours This one day workshop covers the configuration and operation of negotiating IKE/IPSec Security Association (SA) between Cisco IOS devices. The devices will authenticate using certificates provided through enrollment with a Windows 2008 R2 Certification Authority. The Windows 2008 R2 server will run the Simple Certificate Enrollment Process (SCEP) using the Network Device Enrollment Service (NDES). Audience: Suitable for network planners, engineers or anyone interested in operation of Cisco IOS devices running IPSec using certificate authentication.
waaacdwnpsr One Day Workshop for AAA of Cisco Devices using Windows 2008 NPS RADIUS 7 hours This one day workshop covers the configuration and operation of the RADIUS protocol in the authentication, authorisation and accounting of accessing the management software of Cisco IOS devices. The RADIUS server is Network Policy Server (NPS) in Windows 2008 R2. Audience: Suitable for network planners, engineers or anyone interested in RADIUS operation with Cisco IOS Devices and NPS. Workshop is almost all practical. If extended to 2 days it will be approximately 50% practical.
casapixo Cisco ASA/Pix Operation 28 hours A 4 day instructor-led practical course designed to familiarise delegates with the Cisco ASA Firewall CLI and ASDM. The course details the key commands used to configure and secure networks using the ASA Firewall with v8 of the operating system and version 6 of the ASDM. Delegates will configure the ASA using the console port, TFTP server, telnet and SSH using local and RADIUS authentication. The device will be configured to utilise Syslog and SNMP. ASA Firewalls will also be configured to use Access-Lists, Network Address Translation and VPN's utilising IPSec protocols. The course will cover the theory of Public/Private Keys, shared secret keys and their use in forming Site to site VPN's between ASA Firewalls using IKE and IPSec. Students will configure the units to create site to site VPN's, remote access VPN's using the Cisco Secure VPN Client and Web VPN's. The course will cover the theory of failover and delegates will configure Active/Standby failover on the ASA. Privileged commands and protocol analyser traces will be used, where necessary, to debug protocols and ensure proper operation of the ASA Firewall. Students will also perform password recovery operations. This course will involve interfacing the ASA with other network equipment, such as routers and switches, as would be expected in a network environment. Audience: Course is suitable for anyone involved in ASA firewall configuration and network security Course is approximately 50% practical
67525 Cisco Unified Wireless Network (CUWN) 35 hours Overview This course enables a network administrator to deploy a wireless LAN (WLAN) enterprise solution through the identification and successful implementation of site-appropriate hardware and software features in a Cisco Unified Wireless Network. Audience Anyone involved in the deployment of a wireless LAN solution. After you complete this course you will be able to: Identify how the Cisco Unified Wireless Network solution meets the challenges of successful WLAN deployments Select and properly install the Cisco Unified Wireless Network hardware appropriate to site and use requirements Administer the WLAN, 802.11 security policies, and QoS appropriately to protect and optimize performance on the wireless network Configure and implement the key Cisco Unified Wireless Network security features to mitigate WLAN security threats Utilize a recommended troubleshooting methodology and the various tools available to gather and assess system data to isolate equipment failures and security threats
waaacdwtacacs One Day Workshop for AAA of Cisco Devices using a Windows-based TACACS+ Server 7 hours Suitable for network planners, engineers or anyone interested in TACACS+ operation with Cisco IOS devices. Course is almost entirely practical if one day. If extended to 2 days due to lack of pre-reqs it will be around 50% practical.
3712 Cisco CCNA Syllabus in 5 Days 35 hours A 5 day practical networking course designed to familiarise students with Cisco IOS (version 12). The course details the key commands used to configure and secure Cisco routers and switches, and covers the CCNA syllabus - including wired and wireless LAN access. Students will inter-connect networks by implementing static routes, distance-vector and link-state based dynamic routing protocols. The devices will be configured to route traffic across LAN/VLAN//WAN boundaries, by encapsulating datagrams across serial data links using various WAN protocols, such as HDLC, Frame Relay, ISDN and PPP (with CHAP authentication). VLAN encapsulation/tagging will be via IEEE802.1Q/P. Standard and Extended Access Control Lists will be configured and applied to router interfaces to filter traffic based on IP address and/or traffic type. Students will configure static and dynamic NAT to route between private and public networks and cover the theory of Virtual Private Networks (VPN's) Students will copy router configurations and IOS images to/from a TFTP Server. Privileged commands will be used to debug TCP/IP protocols to ensure proper operation of the routers. Students will also perform password recovery operations. The course is primarily aimed at IP v4 but does give an overview of IP v6 addressing and covers migration from an IP v4 to an IP v6 network. Other protocols and technologies (VPN's / Wireless) may be demonstrated if time permits. Course can be customised to precise requirements of customer. Audience: This course is suitable for anyone looking for a basic understanding of internetworking with Cisco devices and covers the CCNA syllabus. Course is approximately 50% practical
sipvoip SIP protocol in VoIP 21 hours The course consists of two complementary parts – a theoretical and a practical one. The first is a one day introduction covering motivation, philosophy, fundamentals and rules of operation of the SIP protocol and ways it is used to implement telecom services with focus on IP telephony and VoIP. The second two-day part enables participants to learn practical aspects of service operation within a framework of hand-on laboratory exercises giving detailed insight into configuration of components of SIP telephony architecture, SIP signalling at both message sequence chart and internal message structure levels, and assists in understanding of typical problems and troubleshooting including security and telecom fraud aspects. The trainers will share their experience in launching, operation and management of SIP telephony covering also virtualization and cloud based solutions. Practical part is presented using both SIP hardphones and softphones and IP telephony servers (Asterisk and Freeswitch). Participants can take advantage of the fact trainers have got rich technical and business experience in IP telephony and submit their own problems and questions. They will be included in the agenda at wrap-up as a supplement to the training to meet current urgent needs of clients. Training is addressed to participants with basic knowledge and experience in telecom services – specifically in VoIP and IP networking.

Upcoming Courses

Weekend Cisco Security courses, Evening Cisco Security training, Cisco Security boot camp, Cisco Security instructor-led , Cisco Security on-site, Cisco Security training courses, Cisco Security trainer , Cisco Security one on one training , Cisco Security instructor, Cisco Security coaching, Evening Cisco Security courses, Cisco Security private courses,Weekend Cisco Security training

Course Discounts

Course Venue Course Date Course Price [Remote / Classroom]
Advanced R Programming Hamburg Tue, 2018-01-30 09:30 891EUR / 1241EUR
PHP Patterns and Refactoring München Mon, 2018-03-26 09:30 3812EUR / 4462EUR
Introduction to Machine Learning Nürnberg Wed, 2018-04-04 09:30 891EUR / 1241EUR
Drupal and Solr Stuttgart Thu, 2018-05-17 09:30 2457EUR / 2957EUR
Data Mining with R Bremen Wed, 2018-06-20 09:30 1854EUR / 2354EUR
Linux LPI LPIC-1 Exam 101 Preparation Köln Tue, 2018-07-03 09:30 1872EUR / 2372EUR

Course Discounts Newsletter

We respect the privacy of your email address. We will not pass on or sell your address to others.
You can always change your preferences or unsubscribe completely.

Some of our clients